Safety Barrier

crash-barrier
crash barrier
crash barrier

This product is widely used in installations such as industrial/retail estates, car parks and warehouse facilities. Available in straight beams or in a variety or radii, when combined with the appropriate corner sections, end units and post options, will more than satisfy the barrier requirements of your site.

All items, except the plastic end cap, have a standard galvanised finish.

Items available:

  • Straight Beam – 3500mm LENGTH – 3.0mm THICK – GALVANISED – 42.4KG
  • Curved Beam – CONCAVE – 5000MM RADIUS – 3500MM LENGTH – 42.4KG
  • Curved Beam – CONVEX – 5000MM RADIUS – 3500MM LENGTH – 42.4KG
  • Curved Beam – CONCAVE – 6000MM RADIUS – 3500MM LENGTH – 42.4KG
  • Curved Beam – CONVEX – 6000MM RADIUS – 3500MM LENGTH – 42.4KG
  • Wing End Terminal – The Wing End Terminal is used to terminate a run of safety barrier. It provides an effective, robust solution in high volume traffic areas. Please note: This terminal end is not suitable for use where pedestrian access is required. Installed using one post (choice available) which also serves to support the end of the bar
  • Pedestrian End Terminal – The Pedestrian End Terminal is used to terminate a run of safety barrier. It provides an effective solution in high volume traffic and pedestrianised areas. Installed using one post (choice available) which also serves to support the end of the barrier.
  • Plastic End Cap – The Plastic End Cap is used to terminate a run of safety barrier. It provides an effective solution in pedestrianised areas. Please note: This Plastic End Cap is not suitable for use where vehicle access is required. Installed by sliding over the end of the beam and held in place with the post bolt set.
  • 90 degree External Corner – Suitable for use where two runs of barrier meet at 90°, effectively joining and eliminating any gap in the barrier. Installation is with two posts (choice available) which also serve to support the end of each barrier run, two M16 x 50 post bolt sets, and 16 No. M16 x 35 lap bolt sets.
  • 90 degree Internal Corner – Suitable for use where two runs of barrier meet at 90°, effectively joining and eliminating any gap in the barrier. Installation is with two posts (choice available) which also serve to support the end of each barrier run, two M16 x 50 post bolt sets, and 16 M16 x 35 lap bolt sets.
  • 45 degree External Corner – The 45° External Corner Connector is suitable for use where two runs of barrier meet at 45°, effectively joining and eliminating any gap in the barrier. Installation is with two posts (choice available) which also serve to support the end of each barrier run, two M16 x 50 post bolt sets, and 16 M16 x 35 lap bolt sets.
  • 45 degree Internal Corner – The 45° Internal Corner Connector is suitable for use where two runs of barrier meet at 45°, effectively joining and eliminating any gap in the barrier. Installation is with two posts (choice available) which also serve to support the end of each barrier run, two M16 x 50 post bolt sets, and 16 M16 x 35 lap bolt sets
  • Adjustable Corner – The Adjustable Corner/Bullnose Joint can vary a change in direction from 0 – 180°. It is also used to terminate a double sided safety barrier run – giving rise to the name Bullnose. Installation is with two posts which also serve to support the end of each barrier run, and 16 M16 x 35 lap bolt sets.
  • Sprung Barrier Bracket – The Sprung Barrier Bracket offers a heavy duty and flexible system which allows the barrier to deflect and spring back into place after impact. It is widely used in industrial and logistics warehousing and is particularly useful in areas where forklifts are operating. The post is surface mounted and is compatible with both the Corrugated and Open Box Beam barrier systems.
  • Concrete in Post 100x44mm ‘Z’ section x 1200mm long – Steel posts in ‘Z’ section have been the traditional and time served choice for a number of years and are suitable for commercial areas, car parks and industrial parks, etc. These posts are suitable for non highway use and where frequent contact is likely. Compatible with both the Corrugated and Open Box Beam barrier systems.
  • Concrete in Post 125x90mm ‘Z’ section – Steel ‘Z’ section posts have been the traditional and time served choice for a number of years, used in commercial areas, car and industrial parks, etc. These posts are suitable for non highway use and where frequent contact is likely. Compatible with both the Corrugated and Open Box Beam barrier systems.
  • Concrete in Post 150x75mm ‘I’ section – Steel ‘I’ section posts provide a more robust solution than the traditional ‘Z’ section posts, used in commercial areas, car and industrial parks etc. they are also frequently used around waste disposal and re-cycling plants. Compatible with both the Corrugated and Open Box Beam barrier systems.
  • Base Plated Post 150x75mm ‘I’ section – Steel ‘I’ section base plated posts are ideally suited for bolting directly onto a concrete surface. A choice of two fixing options are available; the standard anchor bolt or the chemical stud system, both available on request.Compatible with both the Corrugated and Open Box Beam barrier systems