Liberton curved top double gates 3600mm wide x 900mm high

  • Liberton curved top entrance double gates 3600mm wide x 900mm high
  • Each leaf is 1800mm wide x 900mm high
  • Frame size on all entrance gates is 95mm x 70mm and gates finish 70mm thick
  • 125mm rise from shoulder to middle
  • TGV cladding finishes are 90mm x 15mm.
  • Gate bracing is  95mmx 55mm thick.
  • All gates are fully pressure treated in component form and then assembled using stainless steel fixings.
  • Height measurements are to the top of the ‘ear’ of the gates (to highest point)
  • Ears of the gates are 80mm above the top framing bar.
  • Recommended post size could change depending on the height of the gates.
  • We recommend a 150x150mm timber post you could also use a metal post + bracket this would also depend on the height of the gates.
  • Lead times vary – please inquire for more information

£1,100.00FINANCE AVAILABLE

This product is available for finance. Please fill out the details below to see the available options.

Your initial deposit would be £0 leaving a loan of £0. Your monthly repayment would be £0 and the total amount repayable will be £0

Share this product!
SKU: LIBCURVED3.6x0.9 Categories: , Tags: , , , ,
   

Description

  • Lead times vary – please inquire for more information

DELIVERY / USEFUL INFORMATION

Delivery charge applied is based on Postcode.
An approximate date for delivery will be given a couple of days after placing your order, either by phone or email.
There must be available parking, if there are parking constrictions, please make us aware as this may incur a charge.
We try to give either an AM or PM time slot for our deliveries, as we cannot always give a specific time of delivery.
Our trucks are tracked, so if you would like a more specific time, please phone on the day of delivery or the day before.

  • Liberton curved top entrance double gates 3600mm wide x 900mm high
  • Each leaf is 1800mm wide x 900mm high
  • Frame size on all entrance gates is 95mm x 70mm and gates finish 70mm thick
  • 125mm rise from shoulder to middle
  • TGV cladding finishes are 90mm x 15mm.
  • Gate bracing is  95mmx 55mm thick.
  • All gates are fully pressure treated in component form and then assembled using stainless steel fixings.
  • Height measurements are to the top of the ‘ear’ of the gates (to highest point)
  • Ears of the gates are 80mm above the top framing bar.
  • Recommended post size could change depending on the height of the gates.
  • We recommend a 150x150mm timber post you could also use a metal post + bracket this would also depend on the height of the gates.
  • Lead times vary – please inquire for more information

Additional information

Dimensions 75 × 3600 × 900 mm